Spring Time Updates

It’s spring time and there is plenty of work at the base camp clearing brush and pruning apple trees. I Graincheked the process and made a public feed. Generally the goal as I learned it, is to get sun and air to the apples on the branches. My strategy is based on 5 conditions I learned about pruning plus 1 that might be unique to the very overgrown trees at the base camp:

1: Remove anything that isn’t part of the apple tree. I had a very mature bush like plant that had pushed its way to the top and was tangled in the upper canopy. The bush needed to go along with smaller versions of the same that were sprouting up around the base of the apple tree. This may be more unique to my overgrown trees.

2: Remove dead or diseased branches. I had plenty of obviously dead branches, some I took down that probably could have stayed and some I left that probably won’t produce. The birds were very excited that I was touching their tree so I left some branches just for them. Lots of decisions to make and it was super interesting to watch the living portion of the tree take shape as I removed the dead. I’ll have to look into what the apple wood is good for.

3: Remove branches below 4 feet. I have plenty of deer in the area and don’t mind sharing some fruit resources with them so I left a few of the lower branches and took those that were dragging on the ground.

4: Remove suckers, which are branches that grow from the roots or trunk. It’s amazing to me how determined plants are to grow! A little root shows through the soil around the tree and a branch or entire tree sprouts out and shoots for the sky. I pruned almost all of the suckers but left one that had basically replaced half the tree with a trunk of its own that measures 4+ inches across.

5: Remove water spouts, which are branches that grow straight up. My understanding is that a bird should be able to fly through the tree and water spouts would deter this. They will also cast shade on the more valuable branches. I found that my trees, full of character, have complicated branches that are difficult to interpret. Some branches may have started as water spouts but now have a branch that perfectly fits into a sun spot.

6: Remove branches that wind around or cross over another. Pruning was very satisfying as it seems like each step in the process was breathing fresh air into the apple tree. When I pictured a branch putting out leaves, blossoms and apples it seemed claustrophobic until some of these branches that were attempting to take up the same space were removed. It wasn’t always clear which branch should be taken and which should be left though. I went around and around the tree a few times making more adjustments as I went.

I Graincheked the process in the Base Camp project using a new task called pruning. This allowed me to make a custom feed called Agriculture that includes just this new task and any similar tasks I may add in the future. The Agriculture feed is shared publicly and any Grainchek user can check out my agriculture progress at the base camp!

Untie the knots

https://www.tiktok.com/@grainchek/video/7077524856518085931?is_from_webapp=1&sender_device=pc&web_id=7061918611515098629

In this systematic approach to drawing two interlocking chain links I start with a rectangle as the base shape. Pretty simple. All the action starts with the first line off of the base shape. I give these lines the value of c (clockwise) or cc (counter clockwise). I found that if half of the lines are c and the other half are cc, then when I have completed the systematic drawing of the chain links, the two chain links are not interlocked. Then I start with a base shape that has an odd number of sides: a triangle. When all the lines are c, the result is a knot. When half (rounded to the nearest whole number) are c and the remaining are cc the knot is untied… I don’t really understand how this happens or why but I can observe different patterns with varying base shapes and varying ratios of c to cc.

At Grainchek we are working hard to untie the knot of time tracking. What are the variables that affect a user’s interest in tracking time? Why do I track time inaccurately? If we adjust the parameters within Grainchek’s time tracking system what is the outcome? It’s different than observing odd and even polygons become links and knots but some of the mystery is similar!

Repeat: 2nd beam

We’re working on some exciting developments in the Grainchek chat module but until then, there are already some unique functions. The team did a great job making it possible to share a Grainchek feed within a chat thread.

While I’m chatting with a friend I can tap the first button in the message field and select a feed to share with this user. Even if I have already shared the feed with the user, this function will drop a card into the thread that both of us can tap on to access the feed. It’s a great way to quickly share, analyze and discuss feeds. If the feed contains time that should be accumulated with others, it can then be added as a subfeed.

Tapping the second button allows me to share individual events to the Grainchek chat thread. The card that is dropped into the conversation contains details of the event including the photo, time stamp, duration, message and task.

In this video as I use the tree totter to trim, cut and relocate another spruce beam, I can track the time, share a feed and discuss. I have made a few feeds from the base camp public so everyone can follow along on the progress in Grainchek.

Problem solving ceiling geometry

Grainchek in the office: When I’m working from home I use Grainchek similar to when I’m in the field. The day starts with pressing the big green “START” button. Then I use task camera icons to take photos of my computer work at different stages in the process. Finally I use feeds to share, collect and quantify the time spent. Now I need to find the radius of the ceiling at a given location, with a given ceiling pitch and given ceiling height. c=1/2e

Dropping a Spruce Tree onto the Teeter-Totter

The Teeter-Totter works great! It’s very challenging to know how a new idea is going to work. I recognized the challenge: Trees will need to be removed. Then an opportunity: Trees can be used as beams. Then another challenge: I need to get the tree up on top of the posts. Then another opportunity: The tree is really close to the height I need it right where is stands. Next challenge: I need an apparatus that can connect the dots… The development of Grainchek as a useful tool has a similar pattern of challenge and opportunity!

Getting Close to the Spruce

The apparatus I’m calling the Teeter-Totter (it’s really fun to say!) will serve a few purposes. The first purpose is to provide staging for delimbing and inspecting the first spruce tree to become a beam. While tackling the task of preparing the spruce tree to become a beam, I share the basic sequences within Grainchek of tracking my time during the day: Pressing the Start button in the proper project. Using the camera icon from the proper task button. Recognizing that the task selected is for the work I have been doing.

Sharing Feeds

Grainchek at Sunrise

As part of the chat module in Grainchek, we’ve built in the ability to share and view feeds from within a chat thread. Send me a friend request in Grainchek: Pete Brosey. I’ll accept and we can chat. From within our chat thread I can share a feed with you that includes all the work going on at what I’m calling the base camp. The base camp is in the background of the video. As a Grainchek user you can tap on the feed in our chat thread and view the current events within the feed. You can come back later and select it again or look up the feed in the chat history of feeds I have shared with you. The team did a great job building in this unique Grainchek chat function!

Shelter – a public feed

Minimum viable shelter

We recently added the ability to make a feed public. A user’s public feeds are then visible to Grainchek users that view the user’s profile. My name is Peter Brosey: Grainchek users can look me up in the app and view my profile including the public feed I have shared of my work on the base camp. This video is a quick tour of the pod that I have been staying in 4 days per week at the base camp.

Public feeds are a great way to share your accomplishments. It’s super satisfying to know that as I’m thrashing around my time is being tracked clearly and simply and my progress is being shared!

Google, Facebook, Apple

You can now log in to Grainchek using your Google, Facebook or Apple accounts. This streamlines the login process and allows you to use Grainchek without creating a new account. Google, Facebook and Apple have built some amazing tools that make the Grainchek app possible.

Starred Messages

When chatting in Grainchek, long pressing on a message offers the option to star the selected messages. All your starred messages can be viewed at your personal profile screen. All the starred messages with a particular friend can be viewed by selecting “Star Messages” from the 3 dot drop down beside the friend’s user name in the chat thread.